Advan R6 18x8.5 +37 5-114.3 Machining & Racing Hyper Black Wheel
Note: Wheel is Priced Individually
The Advan RG finally enters the 4th generation.
The lightweight wheel developed for installation on the ADVAN Works Gymkhana machine at the circuit production race and the All Japan Championship was the RG, which was an acronym for Racing & Gymkhana.
The basic design of the slender 6-spoke has not changed from the first generation. However, the 4th generation has acquired the most aggressive design of all time. The spoke width is designed to be slightly wider than the predecessor RGIII, which further emphasizes its presence. The three types of concave shapes that are set, namely the standard design, GTR design, and super GTR design, all have a linear form. It can be seen at a glance that it is different from other ADVAN Racing casting wheel groups with a curved tone.
The three-dimensional shape that stands up again after being dented so that the outer circumference of the spoke is largely scooped out is designed even more boldly than the ADVAN Racing TC-4 and RSIII, just like the ADVAN Racing R6 with a forged deep rim 6-spoke wheel. It has an impact as if it was a full-face design.
Side cuts are applied to the sides of each spoke, and "advanced side cuts" that continuously connect the crotch between the spokes are adopted. The logo of "ADVAN Racing" is placed on the rim part in convex letters, and it is also a standard specification that the top surface is diamond-cut by three-dimensional processing.
RG-4 spoke stickers with the new logo are included in all colors